Product ID:PRO-KRIL ACRYLIC LACQUER BASECOAT, NON-LEAD COLOR, 84 SERIES
MSDS Date:01/04/1988
FSC:8010
NIIN:00F029484
MSDS Number: BRWKT

ACME AUTOMOTIVE FINISHES

101 PROSPECT AVE NW
CLEVELAND, OH 44115
US

Emergency Phone: 216-566-2917

Info Phone: 216-566-2902

Cage: ACMEA

ACME AUTOMOTIVE FINISHES

CLEVELAND, OH 44115 US

Telephone: 216-566-2917

Cage: ACMEA

KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: <5%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 20-40%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 10-20%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

HEXONE, METHYL ISOBUTYL KETONE (MIBK), 4-METHYL-2-PENTANONE

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 5-25%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ETHYL ACETATE

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 0-5%

OSHA PEL 1400 MG/CUM

ACGIH TLV: 1400 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

BUTYL ACETATE (N-BUTYL ACETATE)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 0-15%

OSHA PEL 700 MG/CUM

ACGIH TLV: 713 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ETHYLENEGLYCOL MONOBUTYL ETHER ACETATE, BUTYL CELLOSOLVE

CAS: 112-07-2

RTECS: KJ8925000

Fraction By Weight: <5%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

WET NITROCELLULOSE, NITROCELLULOSE, NITRATE CELLULOSE

CAS: 9004-70-0

RTECS: QW0975200

Fraction By Weight: <5%

ACRYLIC POLYMER

Fraction By Weight: 10-20%

7.5-8.2

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE, SKIN, OR RESPIRATORY IRRITANT.
NERVOUS SYSTEM DEPRESSION. EXTREME OVEREXPOSURE MAY CAUSE DEATH, OR
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. PROLONGED OVEREXPOSURE MAY
CAUSE ADVERSE EFFECTS TO THE LIVER, URINARY, BLOOD-FORMING,
CARDIO-VASCULAR & REPRODUCTIVE SYSTEMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE, DIZZINESS, NAUSEA, LOSS
OF COORDINATION, UNCONSCIOUSNESS, DEATH. EYES/SKIN: REDNESS,
ITCHING OR BURNING SENSATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. KEEP WARM
& QUIET. SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER
FOR 15 MINS. INGESTION: NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS P ERSON. DON'T INDUCE VOMITING. GIVE SEVERAL GLASSES OF
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:21-36F
Lower Limits:0.5%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIP & SCBA. WATER SPRAY
MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
USE WATER TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. APPLICATION TO HOT SURFACES REQUIRES
SPECIAL PRECAUTIONS. VAPORS WILL ACCUMULATE READILY & IGNITE.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
REMOVE WITH INERT ABSORBENT.

Handling and Storage Precautions:KEEP AWAY FROM IGNITION SOURCES.
DURING USE & UNTIL ALL VAPORS ARE GONE: KEEP AREA VENTILATED. DON'T
SMOKE. CONSULT NFPA CODE. DON'T TAKE INTERNALLY.
Other Precautions:EXTINGUISH ALL FLAMES, PILOT LIGHTS, & HEATERS. TURN
OFF STOVES, ELECTRIC TOOLS & APPLIANCES. USE APPROVED BONDING &
GROUNDING PROCEDURES. KEEP CONTAINER CLOSED WHEN NOT IN USE.
TRANSFER ONLY TO APPRO VED CONTAINERS W/COMPLETE LABELING.

Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
TLV, USE A PROPERLY FITTED ORGANIC VAPOR/PARTICULATE RESPIRATOR
APPROVED BY NIOSH/MSHA. WHEN
SANDING/WIREBRUSHING/ABRADING/BURNING/WELDING DRIED FILM, U SE A
NIOSH/MSHA PARTICULATE RESPIRATOR.
Ventilation:LOCAL EXHAUST: PREFERABLE. GENERAL EXHAUST: ACCEPTABLE IF
THE EXPOSURE TO HAZARDOUS INGREDIENTS IS KEPT BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS AFTER USING.
Supplemental Safety and Health
KEEP OUT OF REACH OF CHILDREN. AVOID BREATHING VAPOR/SPRAY MIST &
CONTACT W/SKIN/EYES. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING THE CONTENTS CAN BE HARMFUL OR FATAL.

Boiling Pt:B.P. Text:163-395F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:75-85

Stability Indicator/Materials to Avoid:YES
WATER, ACIDS, OR ALKALIS. METALLICS CONTAINING ALUMINUM.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME OR OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:HYDROGEN; BY FIRE: CO2, CO

Waste Disposal Methods:WASTE MAY BE HAZARDOUS UNDER THE RCRA. TEST
WASTE FOR IGNITABILITY TO DETERMINE THE APPLICABLE EPA HAZARDOUS
WASTE NUMBERS. INCINERATE IN APPROVED FACILITY. DON'T INCINERATE
CLOSED CONTAINER. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.